Suchergebnis

624 Einträge gefunden.
Artikeltyp





















Neue Artikel seit



API Plan 53C

API Plan 53C

Barrier fluid system pressurized by a piston accumulator supplying clean liquid for an arrangement 3 pressurized dual seal. The barrier pressure is generated from the seal chamber pressure. The system is self-energizing and reacts to fluctuations in the seal chamber fluid pressure.

A  Cooler
B  Piston accumulator
C  Pressure reference
D  Drain
E  Vent


API Plan 54

API Plan 54

Pressurized external barrier fluid system supplying clean liquid for an arrangement 3 pressurized dual seal. The barrier liquid is maintained at a pressure greater than seal chamber pressure and is circulated by an external pump or pressure system.

A  From external source
B  To external source


API Plan 55

API Plan 55

Unpressurized external buffer fluid system supplying clean buffer liquid for the outer seal of an arrangement 2 unpressurized dual seal. Buffer liquid is circulated by an external pump or pressure system.

A  From external source
B  To external source


API Plan 61

API Plan 61

Tapped and plugged atmospheric-side connections for purchaser’s use.

A  Connection plugged


API Plan 62

API Plan 62

Quench stream from an external source to the atmospheric side of the seal faces. The quench stream can be low pressure steam, nitrogen or clean water.

A  Valve
B  Check valve
C  Drain


API Plan 65A

API Plan 65A

Atmospheric leakage collection and alarm system for condensing leakage. Failure of the seal will be detected by an excessive flow rate into the leakage collection system.

A  From mechanical seal
B  To liquid collection system
C  Valve (locked open)
D  Flow control orifice


API Plan 65B

API Plan 65B

Atmospheric leakage collection and detection system for condensing leakage. Failure of the seal will be detected by a cumulative leakage into the system.

A  From mechanical seal
B  To liquid collection system
C  Valve (locked open)
D  Valve (normally closed)


API Plan 66A

API Plan 66A

Throttle bushings in the seal gland minimize the seal leakage leaving the seal gland and allow for detection of a seal failure by an alarm of the monitoring pressure transmitter.

A  Pressure transmitter
B  Segmented bushing


API Plan 66B

API Plan 66B

An orifice plug in the drain port minimizes the seal leakage leaving the seal gland and allows for detection of a seal failure by an alarm of the monitoring pressure transmitter.

A  Pressure transmitter
B  Segmented bushing
C  Orifice plug drain


API Plan 71

Plan 71

Tapped connections for the purchaser’s use e.g., for future use of buffer gas.

A  Connection plugged